OEM / ODM Thermal Factory ·
Cooling and Heating Products Manufacturer for People and Pets
A global OEM/ODM factory producing thermal-regulation products across four lines: human cooling, human heating, pet cooling and pet heating, for wholesale buyers, importers and private-label brands worldwide.
Product range
Cooling and Heating Products We Manufacture
One factory, four product lines. A snapshot of the range, every item runs through the same in-house cutting, filling, assembly and QC process.
Browse by line
Cooling and Heating for People and Pets
Four lines, each with its own specifications, customization options and MOQ structure on its product page.
Human Cooling
Vests, packs, towels and accessories for people in the heat.
Human Heating
Electric heated apparel for cold-climate work and outdoor use.
Pet Cooling
Cooling vests, mats and beds for dogs, cats and horses.
Pet Heating
Heating pads, self-heating textiles and warming coats for pets.
One Factory for Cooling and Heating, People and Pets
We make it here. Sewing, PCM filling and electronic heating assembly run under one roof, so the answers you get on materials, MOQ and lead time come from the people who build the product.
Manufacturing technology
Manufacturing Technology for Cooling and Heating Products
We build products using four core technologies: phase-change material, electric heating elements, fan cooling and water-circulation cooling. Each is produced or assembled in-house and can be specified or customized by the buyer at the product-development stage.
Phase-change cooling
Phase Change Material (PCM)
PCM absorbs and releases thermal energy as it melts and solidifies at a set temperature, cooling the wearer without active power, packed into inserts, pouches or pads worn against the body.
- Phase-change temperature: formulations activate at different thresholds; specify a target range for the end user's climate.
- Capacity & insert weight: sets how long cooling lasts per charge; adjustable per garment size and use.
- Insert format: flat sewn-in pouch, removable pack or segmented pad, matched to construction.
- Recharge method: cold-water submersion or freezer; time depends on weight and water temperature.
Electric heating
Electric Heating Element
Carbon-fiber filaments or stainless-steel resistance wire, woven or bonded into fabric panels, distribute heat across defined zones: back, chest, collar or extremities, depending on the product.
- Voltage & battery: 5V USB, 7.4V or 12V packs, matched to runtime and end-user preference.
- Heating zones: number and placement of heated panels, confirmed at the spec stage.
- Heat levels: three-level control as standard; custom control interfaces for OEM orders.
- Element material: carbon fiber for even, long-flex heat, or resistance wire for cost-efficient use.
Active fan cooling
Fan Cooling
Battery-powered fan modules draw outside air through the garment and circulate it across the body, accelerating sweat evaporation in dry, moderately hot conditions and during high activity.
- Fan count & position: single back-mounted or dual-fan; intake or exhaust airflow confirmed in spec.
- Speed settings: two or three speeds, adjustable via a button on the garment.
- Battery compatibility: 5V USB bank or proprietary pack, to align with your accessory range.
- Shell material: polyester mesh, ripstop nylon or workwear-grade fabric for dust and wear.
Water-circulation cooling
Water-Circulation Cooling
Chilled water is pumped through thin tubing embedded in a vest or suit, removing body heat continuously, the highest-performance method, used in heavy-industry, motorsport, medical and military applications.
- Tubing coverage: torso only, or extended to arms and shoulders, confirmed during spec.
- Pump & reservoir: portable carried reservoir or external chilled supply; flow rate set per application.
- Connector standard: quick-release compatible with your units, or supplied as a complete system.
- Garment material: fluid-resistant shell; tubing bonded in a channel or sewn into a sleeve.
How we work
OEM / ODM and Private Label: How We Work with Buyers
Every product is available for OEM (built to your spec) and ODM (factory-developed and customized for you). Private label (custom logo, packaging, labels and hangtags) applies to both. The program runs in six steps.
Brief & Specification
You provide a product brief; we return a written technical specification covering construction, materials, components, color, dimensions and any certification requirements for your market. Both sides sign off before production.
Sampling
We produce physical samples to the confirmed spec, covering all required colorways and sizes, for your review, fit testing, photography and internal approval. Packaging mockups are supplied where required.
Sample Review & Sign-off
You review samples against the written spec. Color tolerances are documented in delta-E values. The signed sample and spec become the production reference: no bulk begins until sign-off is complete.
Bulk Production
Bulk runs against the signed sample, with in-line QC at cutting, assembly, component integration (PCM insert, heating element, fan module or tubing) and finishing.
Pre-Shipment QC
Before packing, goods are inspected against the signed sample. Powered products get functional testing: heating uniformity, temperature accuracy, connector integrity and safety cut-off. Third-party inspection on request.
Packing & Shipment
Goods are packed to your spec (retail packaging, master-carton labeling, barcodes and country-of-origin marks) and shipped by sea, air or courier with documentation prepared to your requirements.
Private label & NDA. Custom logo, woven or printed labels, hangtags, retail boxes and poly-bag printing are all available. A non-disclosure agreement is available before any designs or buyer-specific specifications are shared.
Sample, Trial and Bulk Orders
Sample Order
One or more physical samples for internal review, photography, regulatory pre-assessment and approval, produced with the same process and materials that will be used for bulk.
Trial Order (Small Batch)
A small batch through the full production process (confirmed spec, in-line QC and pre-shipment inspection) to test market response or verify consistency before a large order.
Bulk Order
Full production against the signed sample and confirmed spec, once sample evaluation and any trial run are complete. Payment terms and scheduling are confirmed at order placement.
Mixed human + pet PO. A single purchase order can combine products from all four lines, shipped in one consolidated shipment, for OEM and standard stock orders alike.
Inside the factory
Factory-Direct Production Across All Four Lines
We manufacture all four product lines within one facility, organized by process type, not as a trading company sourcing from other factories. The same team runs cooling and heating, for people and pets.
Why IceBear
Why Sourcing Teams Buy Direct from the Factory
You deal with the people who make the product, from quote to sample to bulk. Here is what that means in practice.
Source factory, no middle layer
Quotes, samples and bulk are owned by the team running the lines, no trading margin and no relayed answers.
Spec and sample locked first
A written spec and a signed sample become the production reference before any bulk is cut.
Cooling + heating, one shipment
Human and pet products across both thermal lines can ship in a single consolidated PO.
Documents for your order
We provide compliance documents applicable to the specific product ordered, not generic certificates.
Direct Factory vs. Trading Company
| Dimension | IceBear Care · Direct Factory | Trading Company |
|---|---|---|
| Price transparency | Factory price with a visible cost breakdown by material, component and process, no intermediary margin built in. | A markup is added on top of the factory price; the percentage is not disclosed and varies by order. |
| Customization | Spec changes, materials, logo, packaging and labeling handled directly with the production team; short feedback loops. | Requests pass through to an underlying factory; slower response and limited visibility into feasibility. |
| QC visibility | Audit in-line and pre-shipment QC records directly; third-party inspection arranged with full cooperation. | QC is managed by the trader or delegated without your involvement; reports may not be independent. |
| Communication | You talk directly with the people who make the product; technical questions answered at source. | Communication passes through an account manager who may lack technical knowledge of the products. |
| Lead-time control | Scheduling, capacity and shipping managed in one place; delays identified and communicated directly. | The trader depends on the factory's schedule and relays updates with a lag; limited ability to escalate. |
| Certification documents | Documents issued to the factory and provided directly; scope and validity verifiable at the source. | Documents may be withheld or represent a different factory; authenticity is harder to verify. |
What We Confirm Before Bulk Production
Compliance & quality
Certifications by Category & Quality Control at Every Stage
Certification requirements vary by product type and destination market. Specific documents, scope and validity are provided on request at the quotation or sample stage.
Electrical Heating Products
Heated vests, jackets, gloves, shoes, pet heating pads and all battery-powered heated accessories. CE covers EMC and low-voltage safety for the EEA; RoHS restricts hazardous substances for the EU and other markets.
Textile & Soft Goods
Cooling vests, pet cooling mats, cooling towels, pet blankets, dog cooling vests and all fabric-based products. OEKO-TEX Standard 100 tests for harmful substances, relevant for direct skin contact and use by children and pets.
Gel & PCM Products
Gel ice packs, hot/cold packs and PCM inserts. Requirements depend on end-market (retail, medical or industrial) and product classification; we advise on applicable standards and available documentation at the inquiry stage.
All certification documents are available on request. We provide documents applicable to the specific product ordered, not generic certificates. State your target market at the brief stage so applicable testing can be confirmed or initiated.
Quality Control at Every Production Stage
Raw Material Inspection
Fabric, PCM, heating elements, connectors and foam inspected against the order spec. Off-spec materials are held; buyer-specified materials inspected on arrival before cutting.
In-line Inspection
Checkpoints after cutting, during assembly, during component integration (PCM, heating element, fan, connectors) and before finishing. Defects are addressed before the next stage.
Pre-Shipment Inspection
The finished lot is checked against the signed sample and spec: appearance, dimensions and function. Powered products are functionally tested. A report is available per order.
Third-Party Option
Independent verification through your chosen agency, with full access to the floor, production records and QC documentation. Your own QC representative can attend.
Start a sourcing conversation
Request a Product Catalog or Send an Inquiry
We supply a full catalog covering all four product lines, with specifications, available configurations and private-label options. Submit a quote or ask about a specific product below.